The buttonhole is done in a very simple way. The size of the holes will work according to the size of the buttons you need to thread through it. Here we will show you the creation of a horizontal button hole. If you want to work the holes to get them through the tape the procedure is the same for you.
When you reach the part where you will be a hole, you need to do the following: Raise chainlet from as many sows as you want to be the size of the hole. For a small hole, lift up the two eyelets, and lift up the four-eyed chain with a larger hole. In our example, we have raised four eyes in the chain.
Then skip as many stitches as you put into the chain and pass through the next one. In our example, we will skip three eyebrows into the fourth hook of a hook and thread through it.
We now have two eyebrows on the hook, with the hook we engage the thread and pass through both eyes. Ie. we're doing a small stick in that little eye and closing the hole.
In the queue, do the same as you write in the sample. You still have the same number of eyes as at the beginning of the hole design.
To better understand the making look at our video.